Shandong Gamma Gas Engineering Co. Ltd.
Purpose: Gas separation
Nitrogen Generator Use High Quality Precise Air Filters they are used to get rid of waters from the compressed air, Also remove the dust and the oil, Getting clean and dry air for the nitrogen generator. It is very important for the whole system of nitrogen/Oxygen Generator.There are three levels of air filters needed for a Nitrogen Generation System.
Air Filter Specifications
For bulk liquid plus3 micron coalescer (5 ppm w/w maximum remaining oil content)
First stage -two stainless orifice tubes provide 10 micron mechnical seperation.
Second stage– in-depth fiber media captures solid and liquid particles to 3 microns.
For removal of liquid water and oil, removes solid particles to 1 micron (1.0ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
First stage –captures larger particles with alternate layers of fiber media and media screen.
Second stage- coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media.
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content ).
First stage – mutilple layers of fiber media and media screen remove larger particles, pre-filtering the air for the second stage.
Second stage – multiple layers of bonded, blended fiber media for fine coalescence.
Outer coated, closed cell foam sleeve.